Hard Charger (HC)

$139.99$159.99

Clear

Description

Hard Charger (HC)

Mounts to the Foremost (13th) Picatinny Slot of the Rifle’s Upper Receiver

No longer do you have to rebuild your upper receiver or buy a new rifle to have the side charging capability!!

Devil Dog Concepts’ Side Charging Handle System; The HARD CHARGER (HC), mounts to the Foremost (13th) Picatinny rail slot replacing the existing charging handle, turning your rifle into a side charger.

No Machining.  No modifications.

Link For More Info: About The HARD CHARGER

Ergonomically Beneficial – Multiple Ways to Charge – Interchangeable from Rifle to Rifle – Non Reciprocating – Removes Stress on Roll Pin – Reduces Torque on Charging Handle – Field Strippable – Gross Motor Skills – Plenty of Room for Mounting Optics and Sights

All variants of the Hard Charger; Side Charging Handle System are compatible with any Standard Forged (.223/5.56 size), Flat Top AR-15/M-16 type Rifle Upper Receiver.

Not designed to work on billet receivers, left eject rifles, and is not .308 compatible.

See FAQs for caliber and rifle compatibility details.

**FREE SHIPPING**

*Cannot ship outside of the United States.

Mil-Spec Anodized 7075 Aluminum and Stainless Steel

Weighs under 5 ounces.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510

__________________________________________________________________________________________________________

HARD CHARGER PULL HANDLES

The TRADITIONAL PULL HANDLE: Specifically designed for operability in most environments with most set ups. **Note: All Hard Charger options come standard with the Traditional Pull Handle.

The TACTICAL PULL HANDLE: Specifically designed to enhance speed and ease of use in a tactical environment while operating your rifle with gloved hands.

The SUBDUED PULL HANDLE: Specifically designed to create a low profile and enhance operability with the grooved front end. Rounded on end to reduce snagging.

The COMPETITION PULL HANDLE: Specifically designed to enhance speed and ease of use in a competition environment with scoped rifles. Larger and easier to manipulate. Could easily be further enhance by adding a gripping tape.

The EXTENDED COMPETITION PULL HANDLE: Longer than the Competition Pull Handle and specifically designed to even further enhance the speed and ease of use in a competition environment.

*All Side Charging Handle System Pull Handles are completely interchangeable with no tools required.

Made from Impact Resistant Polycarbonate.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510

FREE SHIPPING: Cannot ship outside of the United States.

__________________________________________________________________________________________________________

HARD CHARGER ALUMINUM PULL HANDLES

Aluminum Pull Handles are designed for added durability and machined from 7075 aluminum; which is then coated with a heat cured  Cerakote coating. Available in five options:

The TRADITIONAL ALUMINUM PULL HANDLE: Specifically designed for operability in most environments with most set ups.

The SUBDUED ALUMINUM PULL HANDLE: Specifically designed to create a low profile and enhance operability with the grooved front end. Rounded on end to reduce snagging.

The TACTICAL ALUMINUM PULL HANDLE: Specifically designed to enhance speed and ease of use in a tactical environment while operating your rifle with gloved hands.

The COMPETITION ALUMINUM PULL HANDLE: Specifically designed to enhance speed and ease of use in a competition environment with scoped rifles with the added durability of aluminum. Larger and easier to manipulate. Could easily be further enhance by adding a gripping tape.

The EXTENDED COMPETITION ALUMINUM PULL HANDLE: Longer than the Competition Pull Handle and specifically designed to even further enhance the speed and ease of use in a competition environment with the added durability of aluminum.

*All Side Charging Handle System Aluminum Pull Handles are completely interchangeable with no tools required.

Made from 7075 aluminum with a Cerakote coating.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510

__________________________________________________________________________________________________________

Magpul B.A.D. Lever

Increase speed and operational capability by adding a Magpul B.A.D. Lever to your DDC Hard Charger equipped AR-15 rifle!!
By utilizing these two components together, you are able to be even faster and maintain even more positive control of your rifle at all times!!

Developed from the operational experience of the Magpul Dynamics team, the B.A.D. Lever (Battery Assist Device) is designed to considerably improve the speed and efficiency of the AR-15/M-16 bolt catch. The B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR-15/M-16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.
Made from MilSpec-anodized aluminum, the B.A.D. Lever attaches to the standard AR-15 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation.

Additional information

Hard Charger (HC)

Hard Charger (HC)

Select Polycarbonate Pull Handle style:

None, Traditional, Subdued, Tactical, Competition, Extended Competition

Select Aluminum Pull Handle Style:

None, Traditional (+ $5.00), Subdued (+ $10.00), Tactical (+ $10.00), Competition (+ $10.00), Extended Competition (+ $10.00)

Magpul B.A.D. Lever

ADD a Magpul B.A.D. Lever (+ $10.00), WITHOUT Magpul B.A.D. Lever

Product Search

300x100 Shop Rainierarms.com Today!

Featured Products

Product categories

Sign Up For Deals!