HC-10: 308 Side Charger

Description

HC-10: The AR-10/AR308 Side Charging Handle – Anodized Black

Sick of the charging handle on your AR-10/AR308 Rifle! Turn your 308 AR style rifle in to a Side Charger?

Turn your rifle in to a Side Charger without having to rebuild or modify it. Simply swap out the charging handle and install the Hard Charger. Takes a couple minutes and you are up and running!

Devil Dog Concepts’ Side Charging Handle System = Ergonomically Beneficial – Multiple Ways to Charge – Interchangeable from Rifle to Rifle – Non Reciprocating – Removes Stress on Roll Pin – Reduces Torque on Charging Handle – Field Strippable – Gross Motor Skills – Plenty of Room for Mounting Optics and Sights

The HC-10 Side Charging Handle for 308 type AR platforms is designed to adjust to different thicknesses of the varying types of these rifles. The HC-10 is also designed to adjust for different picatinny rail heights and picatinny slot orientations.

Does not work on POF Piston Driven rifles or DPMS G2 and similar.

For Sig 716 or 716i (See HC-716 & HC-716R Products Now Available)

For Ruger SFAR (See HCT2 & HCR2 Products Now Available)

Models and Compatibility:

1. Hard Charger (HC), AR-15 Mil-spec, Forged Uppers only: mounts to the Foremost (13th) Picatinny rail slot replacing the existing charging handle. *Not designed for Billet rifles including Aero M4E1
2. Hard Charger Tactical (HCT), AR-15 Mil-spec, Forged Upper only: mounts to the Third (3rd) Picatinny rail slot replacing the existing charging handle. *Not designed for Billet rifles including Aero M4E1
3. Hard Charger Rear (HCR), Discontinued and replaced with the new HCR2 (Hard Charger Rear – Gen 2)
4. *NEW* HCT2 (Hard Charger Tactical Gen 2), AR-15 Mil-spec, Forged AND Billet Uppers: mounts to the Third (3rd) Picatinny rail slot replacing the existing charging handle. (Also works for Ruger SFAR & PSA KS-47) *Not designed for Aero M4E1
5. *NEW* HCR2 (Hard Charger Rear Gen 2), AR-15 Mil-spec, Forged AND Billet Uppers: mounts to the First (1st) Picatinny rail slot replacing the existing charging handle. (Also works for Ruger SFAR & PSA KS-47) *Not designed for Aero M4E1
6. *NEW* HC-10 & HC-10R, Forward and Rear mounting models designed for the AR-10 / AR308 Rifles.
7. *NEW* HC-716 & HC-716R, Forward and Rear mounting models designed for the Sig Sauer 716 & 716i Rifles.

HARD CHARGER ALUMINUM PULL HANDLES

Aluminum Pull Handles are designed for added durability and machined from 7075 aluminum; which is then coated with a heat cured Cerakote coating.

The TRADITIONAL ALUMINUM PULL HANDLE: Specifically designed for operability in most environments with most set ups.

The TACTICAL ALUMINUM PULL HANDLE: Specifically designed to enhance speed and ease of use in a tactical environment while operating your rifle with gloved hands.

The FOLDING ALUMINUM PULL HANDLE: Designed to fold forward, out of the way when not in use to reduce chances of catching on gear, etc.

*All Side Charging Handle System Aluminum Pull Handles are completely interchangeable with no tools required.

Made from 7075 aluminum with a Ceramic coating.

_______________________________________________________________________________________________

*Cannot ship outside of the United States.

Mil-Spec Anodized 7075 Aluminum and Stainless Steel

Weighs 6 ounces.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510