Hard Charger®- Blem Item #B1004

Description

Hard Charger® Side Charging Handle System – Blemished Item

Blemish Unit – May have slight wear, scratches or marks. Unit in picture is the exact unit for this listing. Some parts may not be replaceable due to discontinued items, colors, etc.

No longer do you have to rebuild your upper receiver or buy a new rifle to have the side charging capability!!

Available in 3 Mounting Options:

1. HARD CHARGER (HC), mounts to the Foremost (13th) Picatinny rail slot replacing the existing charging handle.
2. HARD CHARGER TACTICAL (HCT), mounts to the Foremost (3rd) Picatinny rail slot replacing the existing charging handle.
3. HARD CHARGER REAR (HCR), mounts to the Foremost (1st) Picatinny rail slot replacing the existing charging handle.

Devil Dog Concepts’ Side Charging Handle System = Ergonomically Beneficial – Multiple Ways to Charge – Interchangeable from Rifle to Rifle – Non Reciprocating – Removes Stress on Roll Pin – Reduces Torque on Charging Handle – Field Strippable – Gross Motor Skills – Plenty of Room for Mounting Optics and Sights

_______________________________________________________________________________________________

All variants of the Hard Charger; Side Charging Handle System are compatible with any Standard Forged (.223/5.56 size), Flat Top AR-15/M-16 type Rifle Upper Receiver.

Not designed to work on billet receivers, left eject rifles, and is not .308 compatible.

See FAQs for caliber and rifle compatibility details.

**FREE SHIPPING**

*Cannot ship outside of the United States.

Mil-Spec Anodized 7075 Aluminum and Stainless Steel

Weighs under 5 ounces.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510

_________________________________________________________

HARD CHARGER ALUMINUM PULL HANDLES

Aluminum Pull Handles are designed for added durability and machined from 7075 aluminum; which is then coated with a heat cured Cerakote coating.

The TRADITIONAL ALUMINUM PULL HANDLE: Specifically designed for operability in most environments with most set ups.

The TACTICAL ALUMINUM PULL HANDLE: Specifically designed to enhance speed and ease of use in a tactical environment while operating your rifle with gloved hands.

*All Side Charging Handle System Aluminum Pull Handles are completely interchangeable with no tools required.

Made from 7075 aluminum with a Cerakote coating.

5 year manufacturer warranty.

_______________________________________________________________________________________________

Magpul B.A.D. Lever

Increase speed and operational capability by adding a Magpul B.A.D. Lever to your DDC Hard Charger equipped AR-15 rifle!!
By utilizing these two components together, you are able to be even faster and maintain even more positive control of your rifle at all times!!

Developed from the operational experience of the Magpul Dynamics team, the B.A.D. Lever (Battery Assist Device) is designed to considerably improve the speed and efficiency of the AR-15/M-16 bolt catch. The B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR-15/M-16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.
Made from MilSpec-anodized aluminum, the B.A.D. Lever attaches to the standard AR-15 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation.