Hard Charger®- Original Front Mount: Fits Mil-Spec, Forged, Standard AR-15/M4

Description

Hard Charger®- for Standard Forged, Mil-Spec AR-15/M4 Rifles

No longer do you have to rebuild your upper receiver or buy a new rifle to have the side charging capability!!

Turn your rifle in to a Side Charger without having to rebuild or modify it. Simply swap out the charging handle and install the Hard Charger. Takes a minute or less and you are up and running!

Devil Dog Concepts’ Side Charging Handle System = Ergonomically Beneficial – Multiple Ways to Charge – Interchangeable from Rifle to Rifle – Non Reciprocating – Removes Stress on Roll Pin – Reduces Torque on Charging Handle – Field Strippable – Gross Motor Skills – Plenty of Room for Mounting Optics and Sights

The Hard Charger® mounts to the 13th Picatinny Rail and is designed to work on Standard, Forged, Mil-Spec Type Upper Receivers & Billet Rifles.

Not designed for Billet Rifles.

This design allows optic and sight mounting to the rear of the Hard Charger. This is the original Hard Charger, Side Charging Handle System.

Models and Compatibility:

1. Hard Charger (HC), AR-15 Mil-spec, Forged Uppers only: mounts to the Foremost (13th) Picatinny rail slot replacing the existing charging handle. *Not designed for Billet rifles including Aero M4E1
2. Hard Charger Tactical (HCT), AR-15 Mil-spec, Forged Upper only: mounts to the Third (3rd) Picatinny rail slot replacing the existing charging handle. *Not designed for Billet rifles including Aero M4E1
3. Hard Charger Rear (HCR), Discontinued and replaced with the new HCR2 (Hard Charger Rear – Gen 2)
4. *NEW* HCT2 (Hard Charger Tactical Gen 2), AR-15 Mil-spec, Forged AND Billet Uppers: mounts to the Third (3rd) Picatinny rail slot replacing the existing charging handle. (Also works for Ruger SFAR & PSA KS-47) *Not designed for Aero M4E1
5. *NEW* HCR2 (Hard Charger Rear Gen 2), AR-15 Mil-spec, Forged AND Billet Uppers: mounts to the First (1st) Picatinny rail slot replacing the existing charging handle. (Also works for Ruger SFAR & PSA KS-47) *Not designed for Aero M4E1
6. *NEW* HC-10 & HC-10R, Forward and Rear mounting models designed for the AR-10 / AR308 Rifles.
7. *NEW* HC-716 & HC-716R, Forward and Rear mounting models designed for the Sig Sauer 716 & 716i Rifles.

HARD CHARGER ALUMINUM PULL HANDLES

The TRADITIONAL ALUMINUM PULL HANDLE: Specifically designed for operability in most environments with most set ups.

The TACTICAL ALUMINUM PULL HANDLE: Specifically designed to enhance speed and ease of use in a tactical environment while operating your rifle with gloved hands.

*NEW* The FOLDING ALUMINUM PULL HANDLE: Designed to fold forward, out of the way when not in use to reduce chances of catching on gear, etc.

*All Side Charging Handle System Aluminum Pull Handles are completely interchangeable with no tools required.

Made from 7075 aluminum with a Ceramic coating.

_____________________________________________________________________________________________________

See FAQs for caliber and rifle compatibility details.

**FREE SHIPPING**

*Cannot ship outside of the United States.

Mil-Spec Anodized 7075 Aluminum and Stainless Steel

Weighs under 5 ounces.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510

_______________________________________________________________________________________________

Magpul B.A.D. Lever

Increase speed and operational capability by adding a Magpul B.A.D. Lever to your DDC Hard Charger equipped AR-15 rifle!!
By utilizing these two components together, you are able to be even faster and maintain even more positive control of your rifle at all times!!

Developed from the operational experience of the Magpul Dynamics team, the B.A.D. Lever (Battery Assist Device) is designed to considerably improve the speed and efficiency of the AR-15/M-16 bolt catch. The B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR-15/M-16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.
Made from MilSpec-anodized aluminum, the B.A.D. Lever attaches to the standard AR-15 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation.