HC-716: (For Sig 716) Side Charger

Description

HC-716: Side Charging Handle for Sig 716 & 716i – Anodized Black

Sick of the charging handle on your AR-10/AR308 Rifle! Turn your 308 AR style rifle in to a Side Charger?

Turn your rifle in to a Side Charger without having to rebuild or modify it. Simply swap out the charging handle and install the Hard Charger. Takes a couple minutes and you are up and running!

Devil Dog Concepts’ HC-10 & HC-716 Side Charging Handle System = Ergonomically Beneficial – Multiple Ways to Charge – Interchangeable from Rifle to Rifle – Non Reciprocating – Removes Stress on Roll Pin – Reduces Torque on Charging Handle – Field Strippable – Gross Motor Skills – Plenty of Room for Mounting Optics and Sights

The HC-10 & HC-716 Side Charging Handle for 308 type AR platforms are designed to adjust to different thicknesses of the varying types of these rifles. The HC-10 & HC-716 are also designed to adjust for different picatinny rail heights and picatinny slot orientations.

Does not work on POF Piston Driven rifles or DPMS G2 and similar.

For AR-10 / AR308 rifle (See HC-10 & HC-10R Products)

For Ruger SFAR (See HCT2 & HCR2 Products Now Available)

Models and Compatibility:

1. Hard Charger (HC), AR-15 Mil-spec, Forged Uppers only: mounts to the Foremost (13th) Picatinny rail slot replacing the existing charging handle. *Not designed for Billet rifles including Aero M4E1
2. Hard Charger Tactical (HCT), AR-15 Mil-spec, Forged Upper only: mounts to the Third (3rd) Picatinny rail slot replacing the existing charging handle. *Not designed for Billet rifles including Aero M4E1
3. Hard Charger Rear (HCR), Discontinued and replaced with the new HCR2 (Hard Charger Rear – Gen 2)
4. *NEW* HCT2 (Hard Charger Tactical Gen 2), AR-15 Mil-spec, Forged AND Billet Uppers: mounts to the Third (3rd) Picatinny rail slot replacing the existing charging handle. (Also works for Ruger SFAR & PSA KS-47) *Not designed for Aero M4E1
5. *NEW* HCR2 (Hard Charger Rear Gen 2), AR-15 Mil-spec, Forged AND Billet Uppers: mounts to the First (1st) Picatinny rail slot replacing the existing charging handle. (Also works for Ruger SFAR & PSA KS-47) *Not designed for Aero M4E1
6. *NEW* HC-10 & HC-10R, Forward and Rear mounting models designed for the AR-10 / AR308 Rifles.
7. *NEW* HC-716 & HC-716R, Forward and Rear mounting models designed for the Sig Sauer 716 & 716i Rifles.

HARD CHARGER ALUMINUM PULL HANDLES

Aluminum Pull Handles are designed for added durability and machined from 7075 aluminum; which is then coated with a heat cured Cerakote coating.

The TRADITIONAL ALUMINUM PULL HANDLE: Specifically designed for operability in most environments with most set ups.

The TACTICAL ALUMINUM PULL HANDLE: Specifically designed to enhance speed and ease of use in a tactical environment while operating your rifle with gloved hands.

*NEW* The FOLDING ALUMINUM PULL HANDLE: Designed to fold forward, out of the way when not in use to reduce chances of catching on gear, etc.

*All Side Charging Handle System Aluminum Pull Handles are completely interchangeable with no tools required.

Made from 7075 aluminum with a Ceramic coating.

_______________________________________________________________________________________________

*Cannot ship outside of the United States.

Mil-Spec Anodized 7075 Aluminum and Stainless Steel

Weighs 6 ounces.

5 year manufacturer warranty.

U.S. Patent No. 9,746,263

U.S. Trademark Reg. No. 5,354,510

5 year manufacturer warranty.